Energy Logger has not recorded power data
The Tinytag Energy logger will only record power data if it is connected to the mains and it is set…
Read MoreHow is the kWh figure calculated? (Tinytag Energy Logger)
In Tinytag Explorer, the kWh figure for data from a Tinytag Energy Logger is calculated for the time/date range that…
Read MoreManually installing USB drivers
If the USB cable/pad drivers for the Tinytag Explorer software have not installed correctly, you will need to install them…
Read MoreCan third-party coils be used with the Tinytag Energy Logger?
The Tinytag Energy Logger will only work with coils supplied by Gemini Data Loggers. Information on the coils available for…
Read MoreHow to clean Tinytag data logger relative humidity sensor
Contamination can build up on relative humidity sensors over time, reducing their accuracy. This article offers advice on how to…
Read MoreWhat do the indicators on the Tinytag View 2 data logger mean?
Tinytag View 2 data loggers have different indicators on their displays that show the data logger’s status. A full overview…
Read MoreReplacement probes for temp and relative humidity data loggers
This article contains information on replacing probes for Tinytag temperature and relative humidity data loggers. Tinytag Radio and LAN data…
Read MoreGetting unexpected readings on a humidity logger
If your humidity logger is showing unusual or unexpected readings, it is likely that the sensor has come into contact…
Read MoreUsing third-party PT100 & PT1000 probes with Tinytag data loggers
Tinytag data loggers can be used with third-party PT100 and PT1000 probes. Information on how to connect third-party probes to…
Read MoreUsing third-party input leads with Tinytag data loggers
Tinytag voltage, current and count data loggers can be used with third-party input cables. This article contains information on how…
Read More